PVC Mosaic Panel: Decorative Plastic Sheet Options In Bathroom, Pearl And Blue Mosaic Wall Panel

Table of contents:

Video: PVC Mosaic Panel: Decorative Plastic Sheet Options In Bathroom, Pearl And Blue Mosaic Wall Panel

Video: PVC Mosaic Panel: Decorative Plastic Sheet Options In Bathroom, Pearl And Blue Mosaic Wall Panel
Video: Epoxy Shower Panels Made Easy 🚿 | Stone Coat Countertops 2024, May
PVC Mosaic Panel: Decorative Plastic Sheet Options In Bathroom, Pearl And Blue Mosaic Wall Panel
PVC Mosaic Panel: Decorative Plastic Sheet Options In Bathroom, Pearl And Blue Mosaic Wall Panel
Anonim

Decorating a room is a very important process. It is necessary to select materials that would not only fit the interior, but also be modern and of high quality. For example, PVC mosaic panels. This is a worthy replacement for ceramic tiles, which not everyone can afford.

Features of mosaic panels

The panels have a number of properties that set them apart from other finishes. For example, wear resistance, moisture resistance. They are not affected by water vapor and are almost impossible to scratch. These features allow the material to be used in bathrooms, kitchens and pantries.

Image
Image

It is quite simple to care for the panels; a damp wipe is enough. They are mounted on an aluminum frame or wooden lathing. If the surface is flat, without drops, then mounting nails can be used.

Modern resin mosaic panels are a practical interior decoration . The coating contains polyvinyl chloride. Above - plastic that protects the outer layer from aggressive detergents, acids and alkaline solutions. The plastic in the composition gives hardness and strength.

The material is completely immune to moisture and fluctuating temperature conditions. Therefore, it will help to improve the bathroom, sauna. The mosaic combines well with other finishing materials.

Image
Image
Image
Image

Mosaic panels come in a variety of colors and textures. This is due to the peculiarities of their manufacture. Any original design solution can be realized with their help.

It is easy and convenient to work with them, because you do not need to prepare the base in a special way . In addition, with the help of mosaic sheets, surface defects can be hidden.

Until a few years ago, the use of PVC panels was a complex process. The material was heavy and the production costs were high. Now, thanks to new techniques, the manufacturing process has become cheaper and easier.

Image
Image
Image
Image

Advantages

Let's consider the main properties.

  • Fire resistance. The temperature at which the panel can catch fire is over 500 ° C. But its main difference from other panels is that it does not ignite in air.
  • Moisture resistance. The mosaic does not allow water to pass through, even at the joints. Therefore, it has found wide application in the decoration of saunas, baths, toilets and bathrooms.
  • Enhanced sound protection. The structure of the panel diffuses sound and makes it quieter. This is possible thanks to the cells that make up it.
  • Flexibility. Due to their flexibility, mosaic panels are used in a variety of design solutions.
  • It is not afraid of mechanical damage, there is no need to worry about the safety of the coating.
Image
Image
Image
Image
Image
Image
  • Light weight and quick installation.
  • Long operational life. The composition of the material includes elements that prevent the growth of fungus. The panels do not rot.
  • Good thermal insulation.
  • Antibacterial properties.
  • Ease of processing. Mosaic sheets can be bent, cut, sawed, cut out geometric shapes, holes are easily made in it.
  • Environmental friendliness. Does not contain heavy metals and toxic substances.
  • Chemical resistance. The coating is not afraid of regular wiping with household chemicals.
Image
Image
Image
Image
Image
Image

Mosaic sheets are produced using PVC free foaming technology . This method not only gives all of the above properties to the material, but also allows you to make it in different thicknesses. Foamed PVC with open pores can be safely used indoors, as it is vapor permeable.

The coating contains additives that increase its UV resistance.

Image
Image
Image
Image

Installation of wall cladding

Mosaic PVC trim looks great on walls. In addition, it hides defects, surface flaws.

You can use two methods for mounting

  • Stuff in a wooden lathing or install a metal frame. Mosaic sheets are attached to the prepared surface using construction brackets or self-tapping screws. There is space between the crate and the wall. You can hide communications there or fix insulation.
  • Place on synthetic resin glue or liquid nails. The mosaic is glued to a prepared surface, dry, grease-free, cleaned. The adhesive is applied to the entire area of the panel, pressed firmly against the wall, then left for 5 days until it dries completely.
Image
Image
Image
Image
Image
Image

Slots will be visible on the mounted surface . This is inevitable, since the butt profiles for the mosaic are not manufactured. The issue can be resolved by using silicone sealant (white, colored), or by purchasing an overhead docking bar.

Due to their plasticity and flexibility, PVC panels are used to decorate complex geometric shapes. They can be cut with an ordinary construction knife. If small cracks are found somewhere, then they can be simply decorated with details, in the form of a convex bar.

Image
Image
Image
Image

Types of mosaic panels

Among the main types are:

  • type-setting panels;
  • sheets of square or rectangular shape with a convex pattern;
  • tiles, the size range of which is from 30 to 100 cm (width).
Image
Image
Image
Image
Image
Image

When choosing mosaic panels, you need to pay attention to the following characteristics:

  • the applied drawing should be clear, well colored, without dark spots;
  • a panel with a large number of stiffeners affects the strength of the coating;
  • the surface of the tile must be smooth, without irregularities and defects.

The standard size of the panels is 95 cm x 48 cm. Their surface can be matte or glossy.

Image
Image

Manufacturers

Mosaic canvases belong to the middle price range. On the Russian market of building and finishing materials, they are represented by domestic manufacturers. Foreign companies are also engaged in the production of such coatings, but their cost is quite high.

Two domestic companies stand out among the manufacturers

Company " Plastdecor "is engaged in the manufacture of PVC mosaic coverings. It was founded in 2003 and is currently the largest company in the industry. The company has established distribution channels and established links with hardware stores. Therefore, its assortment is widely represented in every city. The company does not stand still, but develops all the time. The management invests a significant part of the capital in the modernization and improvement of equipment. A staff of process engineers is responsible for the development of new methods and technologies for manufacturing products, which significantly affects the quality.

Image
Image
Image
Image

Brand name " Decoplast " founded in 1999. He has his own production site. The company also monitors new trends, timely introduces new principles of work. And, accordingly, the quality of the products increases. The plant has implemented a two-level control of the manufactured panels. At the first stage, something that does not correspond to the standards of the plant is eliminated. Decoplast mosaic boards are marked by national and international quality standards.

Image
Image
Image
Image

Interior use

Mosaic has always distinguished itself favorably against the background of other finishes. In the past centuries, the interior decoration of the premises was decorated with mosaics. When laying out the mosaic, glass, ceramics, stones were used. Making a mosaic beautifully is a whole art. This type of finish has found its way into modern design.

Laying out a mosaic according to the rules is a rather time consuming and financially expensive exercise . But modern manufacturers have found a way out. Mosaic layers were made of polyvinyl chloride. This significantly reduced the cost of the material, it became easier to work. Accordingly, the demand for mosaics has increased. In addition, the material is moisture resistant, this has significantly expanded the scope of PVC panels.

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image

7 pictures

Mosaic sheet panels have rightfully taken their rightful place among other finishing materials. They are durable, vapor-permeable, they are not afraid of moisture. The coating will not fade in the sun. They can be used in rooms with high humidity levels. The panels are used in the decoration of the walls of cafes and clubs. There are no restrictions on their use. They are environmentally friendly, comply with sanitary standards, do not contain impurities dangerous to human life.

Today, pearl decorative panels, as well as blue and turquoise, are quite popular. Mosaic panels will easily fit into any interior or create their own unique style. You get a gorgeous texture at a minimum cost. With the help of the color of the mosaic, you can influence the visual perception of the space. Craftsmen can even create color illusions that will make the design of the room unique and memorable.

Recommended: