Shadow Profiles For Stretch Ceilings (24 Photos): For Seams On A Plasterboard Ceiling With Lighting, Flexy And EuroKraab, Ceilings With A Gap Around The Perimeter

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-07 13:49

The article describes the shadow profiles for stretch ceilings. Their application is described for seams on a plasterboard ceiling with lighting, for ceilings with a gap around the perimeter. Attention is paid to the Flexy and EuroKraab models as well as installation.

What it is?

The shadow profile for stretch ceilings has become very popular among the customers of such products. The ceilings themselves are distinguished by simply colossal design possibilities, but the competent installation of such structures is critically important. Traditionally, it is believed that a fabric ceiling can be mounted only with the heating of the main canvas. However, it is quite possible to do without such a technique, just due to the use of innovative profiles. For the manufacture of such models, high-quality aluminum alloys are used.

The result is:

• strong;
• durable;
• resistant to moisture;
• standardized in size;
• suitable for the installation of a wide variety of other connecting elements.

But the shadow profile can be used in other cases as well. Often it is taken for drywall in the interior. Similar products help to build an opening and a joint with:

• door jamb;
• standard finishing;
• overlapping ceilings;
• light block;
• other architectural components of dwellings.

The profile for forming a shadow seam around the perimeter provides the following advantages:

• ease and speed of installation;
• attractive appearance;
• the feeling of a "levitating" ceiling hanging in the air;
• unique and unrepeatable design effect;
• the accuracy of specifying the dimensions of the contour;
• increased safety margin;
• the possibility of equipping with lenses with the effect of light diffusion;
• ease of dismantling;
• free air circulation inside the ceiling structure.

But, alas, the shadow version of the ceiling also has objective disadvantages that do not allow considering this solution the optimal choice for all cases. It is most important to emphasize the fact that this product requires meticulous calculation and professional installation . Not everyone can achieve positive effects and take into account all the subtleties in advance. Other disadvantages relate rather not to the shadow profiles themselves, but to the ceilings for which they are intended. Tension structures may not be strong enough, sometimes sag and collapse.

It is very important to emphasize that the shadow gap when using a high quality profile will be completely correct and geometrically 100% even . Quite a few models are made with backlighting. Inside there is a place for connecting and fixing the LED lamp. More precisely, instead of a lamp in the usual sense, they use LED strips.

In this case, the profiles are supplemented with light-scattering inserts.

But the most valuable property of the shade profile is the abutment it provides to the wall . It is very elegant in appearance and allows you to do without any baseboards and other frames. The absence of edging looks as attractive as possible in a modern interior. In some cases, the border of the canvas is equipped with illumination, just the very joint. Outwardly, it looks just extraordinary.

Modern profiles can be painted in any color, which makes them easier to fit into the interior . It also provides an excellent entry into the atmosphere of minimalistic design. The metal product cannot burst or crack. Responsible manufacturers apply a zinc layer to the surface of the steel product to prevent corrosion. Fully compatible with all types of walls and substrates, including plaster and drywall sheets.

Species overview

But along with high-quality steel, aluminum alloy can also be used for the manufacture of profiles. Thanks to alloying additives, a durable and reliable product is obtained . In many cases, elastic light-scattering lenses are made of PVC, therefore it will not be difficult to integrate such an addition into the profile assembly. But aluminum can be quite different. So, anodized models are suitable for the ceiling on an open gazebo (terrace) or in places with high humidity.

The simple uncoated option is also quite popular . At normal room humidity, such structures serve for a long time. Their price is low. Painted models are slightly more expensive, but they also look better.

It is they who are advised to buy for those who wish to decorate their home or office as harmoniously as possible; as already mentioned, the choice of colors is almost unlimited.

Popular models

Profile is in demand EuroKraab brands … This is a Russian development, but when it was created, all the nuances of foreign technologies were taken into account. The manufacturer diligently selects aluminum, which is precisely what makes it possible to achieve an unusually solid effect. The frame created is very resistant to moisture; he also tolerates strong heating without problems. What is important, by default the profiles are made black, which ensures their visual invisibility in the interval from the wall to the covering.

All EuroKraab products have a standardized length of 2 m. Therefore, you cannot make a mistake with their choice. The part fits into the wall frame. Fastening of the polymer film to it itself is carried out using a "harpoon". Although there is a gap left during installation, it is small enough to be ignored and discarded with additional decoration.

Along with the EuroKraab profile, the system also includes corner pieces and fittings . Special strips of various lengths, prepared at the production at an angle of 45 degrees, will help speed up the installation. But even if there is no product suitable for the parameters, it is easy to make it yourself. Docking devices are additional corners and strips that are placed in the upper grooves of the profiles for a perfect connection of the main elements. It is they who ultimately guarantee the flawlessness of the ceiling line around the perimeter.

EuroKRAAB is not that different from standard versions. But the differences from the usual ceiling will still be visible. The shadow gap has been significantly improved.

High-quality products can last for several decades and at the same time provide the ability to repair walls, install and replace building materials without any problems. You can even paint the wall with a brush through the remaining gap without difficulty.

Flexy products no less interesting and attractive. Since there is no need for caps with decorative properties, the light transmission reaches 100%. The harpoon in this profile is completely invisible. Of course, it is possible to finish the walls in a variety of ways. Provides perfect adhesion to wall surfaces.

You can put a simple LED strip or an RGB level backlight system. Installation is carried out on a special platform with a rim. The result is a visually inconspicuous tape, the removal of heat from which is not a problem. After preparation, the smallest radius is 0.15 m. Connection to the main part of the ceiling is made without the use of accessories.

Flexy supplies several types of profiles . One of them is designed for multi-level structures. Installation of such products is simple. Then it will be possible to quickly dismantle the canvas. To cover the gap, masking with a special insert is used.

There is a type of backlit profile (often placed in 2 rows). Such a product has only one drawback - unsuitability for curved zones. But compatibility with bends at different angles is guaranteed. In this case, the "floating" effect is still ensured.

As in the previous case, there is no need for translucent plugs; experts note compatibility with glossy canvases (there will be no unpleasant reflection).

Installation rules

Fixing EuroKRAAB is possible even in rooms with atypical layouts. If you have to work with an angle of more than 90 degrees, do it yourself . In any case, the work begins with marking by level. In this case, a laser level and a construction cord will help. Measurements and marks are taken from the corners.

The inner corner is formed by fixing the plank to one wall . It is attached to the second wall with self-tapping screws, first - "bait". A steel corner is hammered into the resulting corner. This makes it possible to carefully dock the parts of the profile. Only then the entire assembly is thoroughly fixed.

They work the same way with outside corners . Straight-line fragments are mounted only last. After completing the installation of the frame, all parts of the profile in sharp places are carefully cut down. Otherwise, the canvas may be broken. Docking points are pasted over with tape on an aluminum base; further work does not differ from the installation of classic film ceilings.