2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
An irreplaceable power tool in everyday life with a self-explanatory name, the screwdriver is actively used in construction work. The most common procedure with such a device is to replace the drill. Sometimes it seems that this process is very difficult and practically impossible. However, in fact, replacing a drill in a screwdriver will not be difficult, the main thing is to follow the instructions step by step and pay attention to the details.
Features of the screwdriver
A screwdriver means the same drill, but it has a lower rotation speed of the chuck and the ability to adjust the twisting force. Many hours of twisting and untwisting with their own hands have not yet given pleasure to anyone. The screwdriver will help you quickly and efficiently tighten and unscrew the fasteners . Also, using this device, you can make holes in materials of various densities - metal, wood and stone. The screwdriver is powered from the mains or battery.
The building device is divided into the following types:
- standard;
- rechargeable screwdriver;
- drill screwdriver;
- wrench.
All types of tools differ only in their purpose: a screwdriver (ordinary) is used only when working with fasteners, a drill will help to drill the required hole, a screwdriver is intended for twisting and unscrewing fasteners with a cross-shaped "head", a device with the self-explanatory name of a nutrunner copes well with bolts and nuts …
Replacing the cutting tool
The "tail" of the screwdriver drill is fixed in the chuck. It comes in different sizes, just like the attachments. If the cutting tool is incorrectly installed, the screwdriver can damage the work process and harm your health. For example, due to the "wrong" drill, holes of different sizes with a damaged surface can be obtained. The sharp element will cause serious injury when it "leaves" the cartridge.
Most modern screwdrivers have jaw chucks . They consist of a cylindrical body as well as a sleeve and cams. When the sleeve rotates clockwise, the cams simultaneously press on the drill.
The process of replacing it is simple, but it has a number of individual characteristics. The whole process can be described as follows:
- it is necessary to select the necessary nozzle (bit) for the drill;
- then you need to take the cutting tool and install it in the center of the chuck (between the open "cams");
- after that, it should be fixed by turning the sleeve clockwise (with a key type cartridge, the key is installed in the recess);
- twist the sleeve until the attachment is secured.
It is not difficult to change the drill, but first you need to pull out the previous one. There are the following options for the development of the situation:
- standard removal of the drill (the chuck is not damaged);
- pulling out the drill in the absence of a key;
- removing a jammed cutting element.
With proper operation of the screwdriver, problems should not arise when replacing its working tool - the operation is elementary. To do this, you need to take the key, which is designed to loosen the cartridge, and insert it into the recess. Twist counterclockwise. The unwinding is carried out due to special teeth that are on the objects. There is also another option for removing the drill. To do this, turn on the reverse rotation mode on the screwdriver, hold the outer case of the cartridge and press the "start" button. This way the drill is easily released.
If you do not have a special key, the drill can be removed using a Phillips screwdriver or a nail . It must be inserted into the recess on the chuck and half of it fixed. We twist the opposite part of the cartridge by hand. However, if such untwisting does not work, then we take a gas wrench or a vice - these tools will help to increase the rotation of the cartridge. If the previous options for pulling out the drill failed, then you should resort to "heavy artillery". In some cases, external damage makes it difficult to get the drill. In this situation, it is necessary to relax the "cams" with the help of gas keys and a vice. We completely clamp the cartridge with the keys and rotate (unscrew).
In this process, the simultaneous use of both the key and the vise is encouraged. You can also take a hammer and apply light blows to the chuck - the vibration from the blows helps to relax.
A radical option in the most hopeless situation would be to twist the cartridge from the screwdriver . To do this, it is necessary to squeeze it in a vice and forcefully knock out the cutting tool from the inside using a punch. Naturally, after such a procedure, the screwdriver should be taken to the repair. Summing up, it is worth noting that the procedure for inserting a drill into a screwdriver is quite simple and even someone who has never done this can handle it. The main thing in this process is to follow the recommendations.
Recommended:
How Do I Insert Paper Into The Printer? How To Insert Correctly Into A Laser Or Inkjet Printer? How To Download For Duplex Printing?
This article describes how to correctly insert paper into the printer. What if you're having difficulty and you don't know how to insert paper into a laser or inkjet printer?
How To Insert A Drill Into A Drill? How To Pull Out And Change The Drill Without A Key To Use The Drill? How To Unscrew And Remove It If Stuck?
Basic tips on how to use the drill correctly. The principles of working with the tool: how to insert the drill into the drill and how to pull it out. Description of the sequence of actions in order to change the drill without a key
How To Insert A Drill Into A Hammer Drill? How To Get It Out? How To Fix The Drill Correctly? How To Get It If It Gets Stuck?
Varieties of nozzles for a hammer drill. How to insert the drill into the hammer drill and how to pull it out? How to fix the drill correctly? How to get the drill out of the hammer drill if it is jammed? And how to remove the drill if it gets stuck or broken in the wall?
How To Insert A File Into A Jigsaw? How To Insert It Into A Hand Model And A Jigsaw? Types And Features Of Holders For Paintings
How to insert a file into a jigsaw? How to insert it into a hand model and a jigsaw? How to insert a blade into a jigsaw machine? What are the features of saw blades for different materials? What problems can arise when working with the tool?
How To Insert Staples Into A Furniture Stapler? How To Insert Them Into The Handheld Furniture Stapler Step By Step And How To Refuel Other Types? Replacement Instructions
How to insert staples into a furniture stapler?