2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-09 13:15
When arranging a kitchen, one of the most important points is the correct choice of built-in household appliances. Quite often, hostesses opt for cooking gas three-burner hobs. They appreciate their benefits. In our article, we will consider in more detail such panels, as well as their pros, cons and selection features.
Peculiarities
So, as for the features, the main one can definitely be called a width of 45 cm, which is not standard for gas hobs. The device has 3 heating elements.
Users note that this number of burners is quite enough for an average family.
In addition, the dimensions of the panel help to save free space in the kitchen, which is especially important for rooms with a small area.
Mounting
The purchase of a device is not limited to the circle of worries associated with the installation of a gas hob. Installation also requires close attention. It should be noted that experts do not recommend making it yourself, it is better to contact a professional gas service specialist. This may require additional material costs.
If you embed the panel yourself, you can get serious problems . In addition, an installation error will deprive the consumer of the opportunity to use the warranty service free of charge in the future. For example, the technician can set the minimum flame of the burners.
This is necessary so that the flame cannot go out on its own.
The three-burner gas hob does not require a specific gas supply . Both a centralized network and a regular balloon will do. In the first option, you need to pay attention to the instructions, which say about the working gas pressure recommended for a particular model. If the factory settings differ from the actual pressure reading, it may cause the device to malfunction.
In cases where it is planned to connect the surface to the cylinder, it is necessary to purchase special nozzles. Sometimes they can come with a panel, but this is not a prerequisite.
Exploitation
For those who are accustomed to using gas for cooking, the operation of gas hobs for 3 burners will not be difficult. However, if this happens for the first time, some nuances must be taken into account.
After using the surface, it is recommended to ventilate the kitchen for 10-15 minutes . For a small room, an excellent option would be to install a hood. If not, ventilation should be done as often as possible.
During operation, you need to pay attention to how the fire burns. If the reeds are blue, almost transparent, then the work is going right. If yellow tongues and soot appear, it is recommended that you contact a specialist to check the equipment. The fire can spontaneously extinguish, which threatens the most unpleasant consequences.
The same problems can arise if an error occurs during the surface mounting process.
Pros and cons
According to consumer reviews, gas hobs with a width of 45 cm for 3 burners are in well-deserved demand and cause the least number of complaints. First, the advantages should be noted.
Gas is the cheapest source of energy, which means that its use can lead to significant savings . In addition, the electric panel itself will also cost more than a gas counterpart. It should also be noted that cooking on gas is much faster, which allows you to free up a little extra time.
Most of the models are located on tempered glass, which is very durable and can withstand not only high temperatures, but also mechanical stress.
Also, the material is absolutely safe to use, and even in the event of a strong impact, after which the surface will crack or split, the fragments will not be sharp - it is difficult to cut them.
Cast iron grates are securely fixed on the panel, which allows you to install containers of different sizes on them without fear of tipping over. And the width of 45 cm is enough to be able to cook a wide variety of food.
Users also note the panel's ease of use. It is equipped with rotary switches that are virtually indestructible. The surface can be used by people of all ages.
However, all these advantages do not exclude the presence of disadvantages . Gas itself is not the safest thing, so you have to take care of the constant ventilation of the room so as not to get a negative effect on your own health. You will also need to periodically monitor the nature of the burning of the fire. Installing the device on your own is highly undesirable - you will have to seek the help of specialists. However, all these disadvantages relate more likely to the use of gas in principle than to the disadvantages of gas three-burner panels.
How to choose?
There are many factors to consider and study before choosing a hob. The main ones are: dimensions, material from which the device is made, type of burners, equipment, functionality and manufacturer.
First of all, you need to decide what width and depth of the panel is needed in a particular case.
For example, a narrow hob will suit owners of a small kitchen.
As for the material, both tempered glass and stainless steel can be used . The first type is more common. The glass is very durable, it tolerates mechanical stress and high temperature conditions well. In this case, special care is not required; cleaning agents used in working with glass ceramics are suitable. In addition, the models look very stylish and modern.
As for stainless steel, it is not inferior in strength to tempered glass, however, nuances arise during the maintenance process. The material must not be rubbed with abrasives: iron wool can also scratch it. At the same time, it does not break or split, it is resistant to cracking.
Depending on the type of burners, the price of the gas hob will vary . Standard heating elements are cheaper than express burners, for example.
In addition, additional options are rarely used by consumers.
As for the additional functions provided by modern models, they will also affect the cost of the product. A standard set is enough to fully and without problems prepare food. Auto-ignition is a useful option that will save the consumer from using matches. However, it can fail, which happens quite often. But this is not a problem, since the gas can also be ignited manually.
About manufacturers in the modern market, there are three most popular companies: Kuppersberg, Zigmund & Shtain and Fornelli . They offer high quality goods at reasonable prices. Consumers highly appreciate the hobs of these brands.
Recommended:
Stepladder With 3 Steps: Aluminum And Wooden Ladders With Three Wide Steps, Features Of The Three-step Stepladder
A stepladder with 3 steps is an irreplaceable thing in everyday life. Aluminum and wooden ladders with three wide steps allow for simple household work, including repairs. What material should you choose a ladder from so that it is stable and meets safety regulations?
Wide-angle And Ultra-wide-angle Lenses (26 Photos): What Are They And What Are They For? Soviet Wide-angle Lenses And Modern
Wide-angle and ultra-wide-angle lenses - what are they, what are they for? Features of shooting with such optics, selection of the best models for creating panorama frames or architectural objects
Installing The Gas Hob: How To Properly Integrate The Gas Hob Into The Worktop? Installation Rules. How Does It Attach? What Should Be The Distance Between The Panel And The Gas Pipe?
Installing the gas hob requires precision. The equipment is usually supplied with all the necessary accessories. How to properly integrate the gas hob into the worktop and comply with all safety rules?
Connecting The Gas Hob: How To Properly Connect The Hob To The Cylinder And To The Mains? Rules And Wiring Diagram. How To Connect A Panel With Electric Ignition In The Country?
How is the gas hob connected in the kitchen? How to properly connect the panel to the cylinder and to the mains? What subtleties should the owners of gas hobs take into account in various cases?
Dimensions Of Gas Hobs: Standard Width, Depth Of Built-in Wide And Narrow Surfaces, Features Of Panels With Dimensions Of 45-50 Cm, 60-90 Cm And Others
Before making a purchase, you need to find out as much information as possible about the dimensions of the gas hob. What is the standard width of the hobs? How deep can wide and narrow built-in surfaces be?