Generator For Walk-behind Tractor: Characteristic. How To Install And Connect A 220 Volt Generator With Your Own Hands?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

It is impossible to imagine a walk-behind tractor without a generator. It is he who generates the necessary energy to power the remaining elements of the device. How to install it yourself, and what nuances should be taken into account, will be discussed in the article.

What it is?

Before you purchase, and even more so to install and connect a generator for a walk-behind tractor, it is very important to know what it is.

The generator consists of several components

1. Stator . It is the "heart" of the generator and is a winding with steel leaves. It looks like a tightly packed bag.
2. Rotor . It consists of two metal bushings, between which the field winding is located, in the form of a steel shaft. Simply put, a rotor is a steel shaft with a pair of bushings. The winding wires are soldered to the slip rings.
3. Pulley . It is a belt that helps to transfer the generated mechanical energy from the motor to the generator shaft.
4. Brush assembly . A plastic piece to help connect the rotor chain to other chains.
5. Frame . This is a protective box. Most often made of metal. It looks like a metal block. Can have one or two (back and front) covers.
6. Another significant element is the voltage regulator nozzle . It stabilizes the voltage if the load on the generator becomes too heavy.

It is worth noting that generators for a walk-behind tractor are not much different from generators for other vehicles or oversized devices, the main difference is only power.

As a rule, the 220 volt voltage generators discussed in this article are used in a car or tractor to light a light bulb or headlights, and installed in a walk-behind tractor, they turn on the engine, which later charges other devices.

Features of choice

When choosing an electric generator, the main thing, as noted above, is its power. The power value you require is easy to calculate yourself. To do this, it will be enough to sum up the power of all the devices of the walk-behind tractor and purchase a generator that has a greater value than this number. It is in this case that you can be sure that the walk-behind tractor will be able to provide energy to all devices without jumps and interruptions. The standard voltage value for generators is the same 220 volts.

You should think about purchasing a car generator only if there is a regular, almost daily use of the walk-behind tractor.

In some cases, it is recommended to purchase such an electric generator on a heavy class motoblock model. But it is best not to buy such models because of the prohibitively high cost of some copies in order to avoid the same expensive subsequent repair of the product.

How to connect?

It is not so difficult to install and connect the generator yourself. The main thing in this matter is attentiveness and accurate adherence to the electrical circuit. As with any repair or replacement of technical parts, this will take time.

Below are instructions for installing an electric generator

1. You need to start work by connecting the generator to the electrical unit. It is necessary to connect an energy converter to two blue of the four wires.
2. The second step is to connect one of the two remaining free wires. The black wire is connected to the mass of the walk-behind tractor engine.
3. Now it remains to connect the last free red wire. This wire outputs the converted voltage. Thanks to him, it becomes possible both the work of the headlights and the sound signal, and the power supply of electrical appliances without a battery is instantaneously.

It will be useful to remind you how important it is to follow the instructions. If installed incorrectly, there is a possibility of sparking on the winding, which will lead to its ignition.

At this, the installation or replacement of an electric generator for a walk-behind tractor can be considered complete. But there are some factors and subtleties that must be taken into account, and which must be paid attention to. Let's talk about this further.

What else do you need to know?

It happens that the electric motor immediately after installation and start-up began to get very hot. In this case, you need to stop using the device and replace the capacitors with less power-hungry ones.

It is important to understand that the walk-behind tractor can only be turned on in a dry room or used only in dry weather. Any liquid that gets into the device will certainly cause a short circuit and interruptions in the operation of the device.

For a "simpler" technique, for example, as a cultivator, it is not necessary to purchase a new electric generator, it is quite possible to get by with an old model from a car, tractor or even a scooter.

In addition, it is worth noting that mounted generators have been used in agriculture for many years and have proven themselves to be excellent. It is worth giving preference to such models because of their easy installation and durability.

How to do it yourself?

In case it is not possible to purchase an electric generator, then making it with your own hands is quite feasible even for a beginner.

1. First of all, you need to purchase or prepare an electric motor.
2. Make a frame for the subsequent stationary position of the engine. Screw the frame to the frame of the walk-behind tractor.
3. Install the motor so that its shaft is parallel to the shaft of the standard motor.
4. Install the pulley on the shaft of the standard engine of the walk-behind tractor.
5. Install another pulley on the motor shaft.
6. Next, you need to connect the wires according to the diagram for the installation described above.

An important factor is the purchase of a set-top box. With the help of it, you can measure the readings of an electric generator, which is necessary when assembling it yourself.

Do not allow the generator to overheat. As mentioned above, this is fraught with ignition.

The installation and use of electric generators for various equipment has been practiced for decades both in the agricultural industry and in other industries. Therefore, their installation is a technique and skills that have been worked out over the years, you just have to be careful and follow the instructions.