Motoblock "Salyut-100": Characteristics Of 100-HVS-01, Honda GX-200 And Other Models. What Spare Parts Do You Need? What Kind Of Feedback Do The Owners Leave?

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Motoblocks "Salyut-100" are worth mentioning among their analogues for their small dimensions and weight, which does not prevent them from being used as tractors and in a driving state. The equipment is easy to operate even for a beginner, it demonstrates good performance and reliability.

Features of the line

Salyut-100 is ideal for operation in areas that are too narrow. This can be a garden with a lot of plantings, a mountainous area or a small vegetable garden. This technique can plow, huddle, harrow, loosen and perform other tasks if using attachments.

The engine is located in the construction of the walk-behind tractor, two belts are installed on the clutch drive. The manufacturer has provided a gear reducer and a handle that the operator can adjust vertically and horizontally.

The transmission control is located on the steering wheel . In previous models, it was installed on the body from below, so each time it was necessary to bend over, which, in combination with the cart, became an almost impossible task for the user.

When creating the Salyut-100, great attention was paid to convenience, so it was decided to make the handle ergonomic so that it could be held comfortably without feeling a lot of vibration. Plastic was chosen as the main material for the levers, so that when pressed, it does not injure the hand, as it did with the metal version.

On the lever in the previous version, when pressed, it was constantly pulled up, the manufacturer corrected this defect and now the hand is less tired . If we talk about the design of the steering wheel, then they did not change it. It has stood the test of time and proven to be comfortable. The control is reliable, you can adjust in the required direction, rotate 360 degrees.

Any attachment can be used both at the rear and at the front. Any hitch carries a heavy load, it is distributed evenly, as well as the weight balance. All this made it easier to work with the equipment.

The Salyut-100 is also distinguished by the gear shifting system . It was decided to put the handle on the steering column, closer to the user. There was no need to change the gearbox, only the handle was replaced with a slide and cable control. All this made it possible to simplify the task when towing a trailer, there was no need to reach for gear changes.

There is a plastic pad on the rudder height change unit. Changed the protective cover on the clutch pulleys. Now it completely covers them from dirt and dust. It was decided to change the fasteners, and now the screws are installed, which can be easily unscrewed with a Phillips screwdriver.

Specifications

The Salyut-100 motoblock has a Lifan 168F-2B, OHV engine. The fuel tank holds 3.6 liters of gasoline, and the oil sump holds 0.6 liters.

The role of the transmission is played by the belt clutch. Forward movement is carried out with the help of 4 gears, and if you take it back, then 2 gears, but only after reinstalling the pulley. The diameter of the cutter is 31 centimeters; when immersed in the ground, the knives enter a maximum of 25 cm.

The complete set of the walk-behind tractor includes:

• 2 wheels;
• rotary tillers;
• opener;
• extension cords for wheels;
• crown bracket;
• probe.

The weight of the structure reaches 95 kilograms. There is no front pin, since the front linkage can be secured by turning the steering wheel 180 degrees. During operation, it is necessary to use weights. If the work is done on wet soil, then caterpillars must be used. A carburetor with an open air intake is installed in the design, sometimes there are problems with leakage.

On pneumatic wheels there is a wheel chamber, therefore, it is required to regularly check the pressure and not to load the walk-behind tractor more than the permissible weight, and a semi-differential hub.

All Salyut-100 models use one type of engine, but it is planned to use motors from other manufacturers in the future, including the production of a walk-behind tractor with a diesel unit.

The gear reducer in Salyut-100 is much more reliable than those used in other equipment, since it does not wear out so quickly. The safety factor, which he demonstrates, allows the installation of engines with different technical characteristics.

It also differs in ease of repair, but has an increased cost . Designed to work within 3000 hours, which is significantly superior to other types. The gearbox has a single design with the gearbox, which also had a positive effect on reliability. Using the supplied dipstick, you can check the oil level at any time.

Special attention should be paid to the clutch, which consists of two belts. Thanks to them, there is a transmission from the motor to the torque reducer.

Popular models

Motoblock "Salute 100 K-M1 "- a milling-type technique that can cope with the processing of an area of 50 acres. The manufacturer recommends using the product at ambient temperatures from -30 to + 40 C. One of the advantages is the ability to put the equipment even in the trunk of a car to transport it to the place of work.

Inside there is a Kohler engine (Courage SH series), which runs on AI-92 or AI-95 gasoline. The maximum power that the unit can demonstrate is 6.5 horsepower. The capacity of the fuel tank reaches 3.6 liters.

The crankshaft is made of steel and its liners are made of cast iron. The ignition is electronic, which cannot but please the user, lubrication is supplied under pressure.

" Salyut 100 R-M1 " acquired an excellent ergonomic design, is distinguished by increased comfort of control, excellent maneuverability even in narrow areas. It works stably, has a powerful Japanese motor Robin SUBARU, showing a force of 6 horsepower. Of the positive aspects of using such a technique, one can single out low toxicity of the exhaust, almost instant start-up, and low noise level.

" Salyut 100 X-M1 " comes on sale with a HONDA GX-200 engine. Such a walk-behind tractor is perfect for performing not only work in the garden, but also for cleaning the area from dirt and debris, as well as cutting small bushes. The machine is able to replace most hand tools, therefore it is very popular. She can plow, huddle, create beds, dig up roots.

The power of the power unit is 5.5 horsepower, it works relatively quietly, it uses fuel sparingly, which is also important. The walk-behind tractor demonstrates uninterrupted operation at any ambient temperature.

" Salyut 100 X-M2 " has a HONDA GX190 engine in the design, with a power of 6.5 horsepower. The gear control is located on the steering wheel, which greatly simplifies the operation process. Milling cutters are installed as standard with a working width of 900 millimeters. The equipment can be praised for its compact size and the ability to transport it in the trunk of a car.

The model is distinguished by a low center of gravity, thanks to which the operator does not have to exert much effort while working with the walk-behind tractor.

" Salyut 100 KhVS-01 "powered by Hwasdan engine. This is one of the most powerful motoblocks, with a power of 7 horsepower. It is used in large areas, therefore, its design provides for heavy loads. When using a ballast weight, the maximum tractive effort is 35 kg for the wheels and another 15 for the front suspension.

" Salute 100-6.5 " is distinguished by the Lifan 168F-2 engine and the traction force up to 700 kilograms. The model can be noted for its compactness, lack of problems during operation and affordable cost. Such a technique can demonstrate stable operation even if low-quality fuel is used. The capacity of the gas tank is 3.6 liters, and the demonstrated engine power is 6.5 horses.

" Salyut 100-BS-I " is equipped with a very powerful Briggs & Stratton Vanguard engine, which is fuel efficient. Pneumatic wheels in the complete set have high cross-country ability. The center of gravity is underestimated, thanks to which the walk-behind tractor can be praised for its maneuverability. It can even work on an area with a slope. The power of the equipment is 6.5 horses, the volume of the fuel tank is 3.6 liters.

Subtleties of choice

To choose the right walk-behind tractor for the garden, it is worth listening to the advice of experts.

• The user needs to study in detail the set of possible functions and evaluate the scope of work on the proposed site.
• There are walk-behind tractors that are able not only to cultivate the land, but also to take care of the garden, to clean the territory. They are more expensive, but they allow you to automate manual labor as much as possible.

• When choosing the equipment of the required power, the type of soil is taken into account. In this case, the user should study in detail such technical characteristics as power and torque.
• In the absence of the required weight, the walk-behind tractor on heavy soils will experience slippage, and the result of the work will not please the operator, since in this case the soil rises in places, the uniform immersion depth of the cutters is not observed.
• The performance of the described equipment directly depends not only on the power of the engine installed in the design, but also on the track width.
• The selection shaft is responsible for connecting the power equipment. With such an expensive purchase, it is worth looking at what the capabilities of the walk-behind tractor are in the direction in question.
• If you plan to use the walk-behind tractor additionally as a means of transportation, then you should choose a model that will be equipped with large pneumatic wheels.

• If the technique is used as a snow blower, then it is better if its design is equipped with a proprietary power unit that runs on gasoline with the possibility of additional installation of snow throwers.
• The cost of a walk-behind tractor is 40% dependent on the type of motor that is installed in the design of the model in question. This element must be durable, reliable, easy to maintain. It is worth remembering that diesel units are not used in the cold season, therefore, gasoline "Salyut-100" in this case have an advantage, since they run only on gasoline.
• The walk-behind tractor must have a differential function so that the equipment can be upgraded at the request of the user.
• By the width of processing, you can understand how accurately the manufacturer stated about the performance of the equipment. The higher this indicator, the faster the work will be done, but the engine power must also be appropriate.
• If it is necessary to constantly plow the ground, it is worth considering the depth of immersion of the cutter, but at the same time it will be necessary to take into account the weight of the equipment, the complexity of the soil and the diameter of the same cutter.

User manual

It is easy to find spare parts for the Salyut-100 motoblocks, and this is their great advantage. Before starting work, you will definitely need to assemble the cutters in accordance with the instructions that come with each model. The cutters are set to the required level so that the plowing of the land is of high quality and does not cause any complaints.

The oil in the gearbox is changed after 20 hours of operation of the equipment, taking into account the season when the walk-behind tractor is operated. It is poured through a specially designated hole, on average it is 1.1 liters. The level will need to be checked, for this there is a dipstick in the package.

To adjust the gears, the manufacturer made the process much easier by placing a lever on the steering wheel . If necessary, you can change the reverse gear by tightening the belts in a different position.

If the walk-behind tractor does not start after a long idle time, then the first thing that is required of the user is to blow out the carburetor, and then pour a little gasoline on the damper, which should remove the oil. If a repeated problem occurs, it is advised to return the technician to a service for a more thorough inspection.

In the case when, during the operation of the walk-behind tractor, it turns out that 2 speed jumps out, then you will need to disassemble the gearbox. In the absence of relevant experience, it is better to entrust this to a specialist.

Owner reviews

On the Internet, you can find many positive reviews regarding the quality and reliability of Salyut-100 walk-behind tractors. Some disgruntled users report that oil is leaking from the carburetor. To avoid this problem, the oil level must be carefully monitored and the technician must be kept level.

In general, the quality of operation depends on the operator. If he does not follow the walk-behind tractor, does not follow the manufacturer's instructions, then over time the equipment will start to junk, and its internal components will wear out faster.