Dimensions Of Cast Iron Baths: Standard Sizes - 170x70, 170x80, 140x70 And 120x70 Cm, Options 150x70, 180x80, 170x75 And Dimensions 160x70 Cm

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

Despite the variety of acrylic bathtubs, cast iron bowls do not lose their popularity. This is primarily due to the reliability and strength of the structure, as well as at least 30 years of service life.

Gone are the days when cast-iron fonts were a heavy and rather bulky outwardly structure of an exceptionally rectangular shape of standard sizes. Today on the market you can find several options, in terms of shape, performance of cast iron baths, as well as models of various sizes.

Peculiarities

In the composition of cast-iron baths, iron-carbon compounds are combined, which provides increased product strength and its resistance to mechanical and vibration loads. Carbon is usually cement or graphite. The latter can have a spherical shape, and therefore the product is characterized by greater strength.

A cast iron bath has many benefits

• wear resistance - such a bath does not deform during operation and even under increased mechanical stress;
• due to the increased durability of the product, it is suitable for simultaneous use by several users, as well as optimal for people with heavy weight;
• the heat transfer of cast iron is minimal, so the water collected in such a bath cools down for a long time and imperceptibly for the user, while it is important that the walls of the tank do not heat up;
• resistance to temperature extremes;
• ease of care, the ability to clean the bath with any cleaning agent;
• antibacterial and self-cleaning properties thanks to the pore-free enamel coating.

Among the disadvantages of cast iron bathtubs, a large weight of the product is usually noted: 100-120 kg for a bathtub measuring 150x70 cm, and imported models are usually 15-20 kg lighter than their Russian counterparts. Today's models are much lighter than their Soviet prototypes, since they have thinner, but no less durable walls. However, a cast iron bathtub will in any case be heavier than an acrylic bathtub. However, this drawback is only important during transportation and installation of the bowl; the large weight of the bath does not affect further operation.

Despite the advantages of the enamel coating, it has a significant disadvantage - it is rather slippery. To increase the safety of the product, it is recommended to use a rubberized mat.

The production process of cast iron hot tubs is labor intensive and complex ., which leads to its higher cost. However, this "minus" is leveled by a long (on average up to 30 years) period of operation and unpretentious maintenance.

The complexity of the cast iron casting process is due to another design flaw - the inner space of the bowl is difficult to give a shape that anatomically repeats the shape of the human body.

The installation of the device does not differ from the methods of installing a bath of another type.

Forms and types

Cast iron is a material that does not differ in ductility, and therefore one should not expect a wide variety of shapes from such products. However, if you are looking for a classic rectangular design, you will not be limited in the choice. It is this form, that is, its modification with rounded edges, that is most in demand.

An oval cast iron hot tub is made by hand , which contributes to an increase in the cost of the product. However, it looks elegant and respectable, usually free-standing, equipped with legs. The most ergonomic is the triangular shape of the bowl, since it is mounted in the corner of the room. Moreover, its weight can reach 150-170 kg, so it is not suitable for all types of buildings.

As for the size, manufacturers offer both compact so-called sitz baths and larger bowls.

The depth of the bath is determined by the distance from the bottom of the bowl to its overflow hole. As a rule, deeper fonts are produced by domestic brands, this figure is 40-46 cm. As practice shows, such bowls are more convenient compared to imported counterparts, the depth of which ranges from 35-39 cm.

Depending on the way the bath is installed, it can be:

• wall-mounted - the bowl is installed along one of the walls of the room, usually has a rectangular shape;
• corner - installed in the corner of a room between two perpendicular walls, usually such a bowl has the shape of a triangle or a quarter of a circle, suitable for small rooms;
• free-standing - installed at a distance from the walls or in the middle of the bathroom, it is performed in the form of a rectangle, oval or circle;
• built-in - involves the installation of the bowl in the podium, its side rises only a few centimeters above the level of the pedestal.

The outer walls of wall-mounted and corner models are usually covered with panels, but free-standing models, as a rule, have decorative outer walls. It looks, of course, beautiful, but the owner is required to care not only for the inner, but also for the outer walls.

For ease of use, structures can be equipped with handles, rubberized areas. The use of such baths will be appreciated by the elderly and disabled.

Today, almost all baths, regardless of the material of manufacture, can be equipped with a hydromassage system . It consists of nozzles and other elements that provide a soft massage with air and water-air jets, beating under pressure. Cast iron, along with artificial stone, is the optimal material for a bowl with a hydromassage. Due to the high density and strength of the material, it does not vibrate, which makes using the whirlpool function more comfortable.

The cast iron bath can have a classic white design or have a colored coating. These are beige and bluish bowls that are suitable for any type of interior. The outer part of the device can have a wider color gamut. Preference should be given to models coated with powder dye.

The colored surface will turn out to be uniform and will remain during the entire period of use of the device.

Dimension standards

The sizes of cast iron baths are quite varied. Undoubtedly, one of the most comfortable models is the 180x80 cm bowl. In it, even a tall adult can lie comfortably with his legs stretched out. However, it will not fit into every bathroom in an apartment building. It is important that the bathtub of the selected width "passes" through the bathroom doorway.

However, if you tilt its bowl, then the width of the load will decrease by 40-50 cm.

GOST approved the following sizes of standard cast iron baths . Their length can be 150, 160 or 170 cm, width - 70 or 75 cm, depth - at least 40 cm (relevant only for domestic products).

According to the standard classification of baths, taking into account their dimensions, cast iron bowls can be of several types.

Small

As a rule, their size starts from 120x70 or 130x70 cm, although in the collection of some manufacturers you can find bowls 100x70 cm. They are optimal for small-sized rooms, but they can be used only in a half-sitting position. The weight of the structure is about 100 kg. As a rule, washing in small bowls is not so convenient, but this disadvantage can be made less noticeable if the bowl has a high back. By the way, this model looks incredibly stylish and authentic.

Standard

These structures have dimensions of 140x70 or 150x70 cm and can fit into the bathroom of most standard apartment buildings. Their weight is 130-135 kg. The most popular standard (or medium-sized) bowls are 150x60 cm, 150x70 cm and 150x75 cm, as well as a more compact bowl 145x70 cm.

Large

Such bowls are larger than standard ones. Their length ranges from 170 to 180 cm, the standard width is from 70 to 80 cm (that is, the dimensions of the bowl are 170x80 and 180x70 cm). There are also "intermediate" options, the dimensions of which are 170x75 and 180x75 cm, respectively. Their weight is 150 kg or more, therefore such a bowl is mounted only on concrete floors.

And also large baths are considered to be 170x70, 170x75, 175x70, 170x75, 175x75, 175x80, 170x85 and 180x75 cm in size.

Larger models (for example, 190x80 cm) are rare, due to the low demand for them.

It is not just that the approximate weight of cast iron baths is given - it directly depends on the size of the bowl . At the same time, during operation, the weight of the bowl with water and a person can reach 500 kg. This load is not intended for houses with timber or dilapidated floors. In other words, when choosing the size of the bath, one should focus not only on the parameters of the room and personal preferences, but also take into account the load on the floors.

As a rule, each manufacturer has its own dimensional grid. So, the Chinese brand Aqualux considers a 150x70 cm bowl as standard, and the Italian manufacturer Roca - 160x70 cm bathtubs.

Corner structures usually have a side length of 120-170 cm (domestic brands) and 100-180 cm (imported models) . The most convenient is an equilateral bath with a side length of 140 - 150 cm. Asymmetric models can have various sizes (160x70, 160x75, 170x100 cm - the parameters of the longest and widest sides are indicated). Sometimes the dimensions of asymmetric corner models can correspond to the dimensions of standard baths (for example, 150x75), but due to the irregularity of the shape, they look more voluminous.

That is why, when choosing asymmetric models, it is more correct to focus on the volume of the bowl, and not only on the size.

Usage Tips

When purchasing a cast-iron bath, one should calculate not only its length and width, but also the load on the floor that it will exert during operation.

When choosing a cast iron hot tub, assess the condition of its walls. They should not have roughness, dents, chips - all these are signs of a violation of the production process, which means that the bath will not last long. The thickness of the walls must be at least 5 mm, the edges must be well processed (smooth, without "burrs"). The thickness of the enamel coating on the bottom of the bath should be at least 1.5 mm, on the walls and sides - at least 1 mm.

The cast iron bath is quite unpretentious in maintenance . To maintain its attractiveness, rinse and dry the bowl after each use. Ideally, wipe the enamel with a soft sponge, rubbing it with soap or dripping dishwashing detergent onto it. It is important to rinse off the soapy layer well.

It is unacceptable to put metal buckets and basins directly on the bottom of the font. If necessary, place a rag between the bottom of the bowl and the bottom of the bucket. When washing pets, use special silicone pads and mats.

This will prevent the formation of scratches and cracking of the enamel on the surface of the bath.

Despite the strength of the structure, you should not throw objects into it, pour out dirty water. In the latter case, the dirt particles will become a kind of abrasive that negatively affects the state of the enamel.

It is unacceptable to use aggressive acids to clean the cast iron bowl . Of course, this will bring back its shine and whiteness, but not for long. The use of acids leads to the appearance of microcracks on the enameled surface. They will clog up dirt and over time the bath will become gray and dull.

You will learn more about the dimensions of cast iron baths in the following video.