Dimensions Of Acrylic Bathtubs: Dimensions Of Options With A Frame, Products With Parameters 150x70, 180x80, 120x70 And 140x70 Cm, Rectangular Bath With Dimensions 170x80, 160x70,

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Not a single modern bathroom is complete without a bath. This plumbing item can have a different shape, structure and material of manufacture. One of the most common are acrylic models. Today we will take a closer look at such products and find out with what dimensional parameters they are produced.

Peculiarities

Bathtubs of standard and unusual shapes are very popular. They can be found at any plumbing store. The main thing is to choose a model of suitable dimensions.

Modern bathtubs are produced not only in classic rectangular, but also angular or rounded . All existing options have their own strengths and weaknesses. In addition, designs of different structures differ in their size.

For example, most corner models are impressive in size, and simple rectangular options can be chosen and small (short).

Modern bathtubs can be chosen for rooms made in absolutely any stylistic direction. The richness of the assortment of such plumbing allows you to find a suitable option for any buyer.

The times when bathtubs were made exclusively of heavy cast iron are long gone. Of course, there are heavy and expensive cast-iron models on sale today, but they have many worthy rivals. These include popular and affordable acrylic products.

These types of bathtubs have gained popularity among consumers due to their simple and neutral design, low cost and fairly simple installation. Nowadays, acrylic plumbing can be found in many homes.

The sizes of acrylic models are very different , therefore, it will be possible to choose the right product for rooms with any area. Today, in most cases, bathrooms are very modest in size, and it can be problematic to purchase plumbing for them. But with acrylic specimens, such problems, as a rule, do not happen.

Advantages and disadvantages

Despite its enviable popularity, acrylic bathtubs have more than just positive qualities. Such models also have a number of disadvantages.

The advantages of such plumbing include the following characteristics

• Acrylic bathtubs are lightweight. For this reason, they are easy to install and transport. The standard size model usually weighs about 30 kg. It is quite possible to work with such a product alone, without resorting to assistants.
• Installation of acrylic bathtubs is considered quite simple and affordable. For such plumbing, you can purchase a special frame with an adjustment function. Quite often it comes with a bathtub.

• The assortment of acrylic bathtubs cannot but please modern consumers.
• Acrylic itself is a pliable material that easily takes any shape. That is why many home interior designers turn to plumbing from such raw materials.
• To care for an acrylic bathroom, you do not need to buy special expensive products. In addition, she does not need regular treatments with protective compounds.
• If a small defect appears on the surface of the acrylic bathtub, for example, a scratch, then it will be easy to get rid of it. To do this, you need to clean up the damage with sandpaper. Of course, if we are talking about more serious defects, then it will be more difficult to cope with them.

• An acrylic bathtub has the ability to keep high temperatures. It will not cool quickly, like the water drawn into it. These products are chosen by users who value relaxing treatments.
• As a rule, special anti-slip coatings are present in modern acrylic models. With these additions, the use of the bath becomes safer and more comfortable.
• These types of baths are available in various designs.

• Such plumbing items are hygienic. The fact is that acrylic is a material that does not rot or mold / mildew. Bacteria do not grow on such surfaces.
• The acrylic bathtub can be supplemented with various options. It can be hydromassage, LED lighting and even a built-in music center.
• These types of baths are inexpensive, which only contributes to their popularity and demand.

As you can see, acrylic bathtubs have many advantages. However, they are not perfect.

Let us consider in more detail what disadvantages such models have

• Such products cannot be called very stable due to their low weight. Install acrylic bathtubs as securely and firmly as possible.
• Such baths should not be in contact with high temperatures. Most often, acrylic is used in the production of plumbing, the melting point of which reaches 160 degrees Celsius. It should be borne in mind that there have been cases in which very hot water in an acrylic bath led to its serious deformation.

• Another noticeable disadvantage of an acrylic bathtub is its fragility. Such items are susceptible to mechanical damage - they are very easy to break or damage. It doesn't take much effort to do this - just drop something heavier than a shampoo bottle into the bowl and it can crack.
• It is worth knowing that under the influence of high loads, an acrylic bathtub can "play", bending unnaturally and causing discomfort.
• Acrylic cannot be in contact with all household chemicals. For such models, it is recommended to buy "soft" and gentle products. Otherwise, the surface of the bowl may turn yellow or develop cracks.

• In addition, it should be borne in mind that acrylic baths cannot be washed using abrasive products that can seriously damage the surface of the product.
• There are too many bathtubs in stores made of low quality acrylic. However, such models are presented as reliable and durable, and after a while buyers will be disappointed - the plumbing begins to turn yellow and deform.

Standard dimensions

Bathtubs made of a material such as acrylic can be of a variety of sizes. Thanks to a wide range of parameters, it will be possible to choose the right product for any room.

Most often in stores there are standard rectangular bathtubs with certain dimensional values of the length

From 90 to 120 cm . These types of models are the most compact. They are ideal for those consumers who have a very small bathroom in their apartment / house. Such products can only be used in a sitting position. Their width, as a rule, is no more than 75 cm.

• 140 cm . For users of short stature, a bathtub with this length is a suitable option. You can wash in it in a reclining position. Such models are considered ideal for a combined bathroom.
• 150 cm . The length of acrylic bathtubs of 150 cm is the minimum parameter at which it is possible to carry out water procedures while lying down. Most often, such products are used when arranging Khrushchev apartments. The most common models offered by modern stores are acrylic bathtubs with dimensions of 150x70 cm.

• 170 cm . Acrylic bathtubs with this length are more often purchased for homes with a large area. They do not take up too much space, but they allow you to enjoy water procedures with maximum comfort. Baths with dimensions of 170x70 cm are considered the most convenient.
• From 180 cm . Users who are tall are advised to buy specimens with a length of 180 cm or more (if the area of the room allows, of course). Convenient constructions are considered with dimensions of 180x70 cm, 180x75 cm, 180x80 cm.

For bathrooms of modest dimensions, models of non-standard shapes and sizes are suitable

• Corner options with a length of no more than 160 cm. In such a bowl, you can even accommodate two people, despite the fact that rectangular options may have similar parameters. The main thing to remember is that asymmetric bathtubs take up more space.
• For small rooms, rectangular baths with a standard size are suitable - from 100 to 180 cm. Such models are good because you can wash in them reclining, despite the democratic dimensions.

• The minimum length of square baths can be from 80 to 100 cm. They can also be reclining. They take up a minimum of free space.
• Round baths take up more space and are not suitable for all rooms. Their minimum diameter is 140 cm.
• The sit-down baths are ideal for those who cannot use the standard models. The smallest products of this modification are bathtubs 120x70 cm.
• The smallest length of oval options is 140 cm.

If the area of the bathroom allows, then larger plumbing fixtures of various shapes can be placed in it

• Here you can put a rectangular copy with dimensions of 180x80 cm.
• If square meters allow, you can install a spectacular corner model of a symmetrical shape in the room. Its maximum parameters are 180x180 cm, 190x170 cm.
• The largest oval bathtub has a length of 210 cm. As a rule, such models have a hydromassage.
• The largest round bathtub measures 210 cm in diameter.

In an ordinary apartment, you can buy an acrylic bathtub of the following dimensions:

• rectangular - 170x80 cm, 180x80 cm;
• seated with hydromassage - from 130 to 150 cm (with a width of 70, 80 cm);
• corner hydromassage - 140x140 cm, 150x150 cm (with a height of 60 cm and 70 cm).

Fashionable Jacuzzi for two can also have different dimensions:

• rectangular - length 175, 180 cm or 190 cm, width - 110-130 cm;
• models up to 150 cm wide;
• round - 130x130 cm;
• corner - 150x150 cm.

And also in stores there are many acrylic bathtubs with different dimensional ratios: 140x70 cm, 160x70 cm, 170x75 cm, 100x70 cm, 165x70 cm, 175x70 cm, 175x75 cm, 130x70 cm, 157x70 cm, 145x70 cm, 160x80 cm, 155x70 cm, 150x60 cm.

Thanks to a large selection of acrylic bathtubs of various sizes, each buyer has the opportunity to choose the perfect option for his home.

If you still could not find a suitable model, then you can always order it.

Form

Modern acrylic models have the following shapes, which influence their dimensions:

• rectangular and square;
• corner;
• rounded;
• oval.

As for the corner models, they are divided into symmetrical and asymmetrical

• Asymmetric bathtubs look very stylish and original. With their help, you can transform the interior and make it more attractive. Such designs are right-handed and left-handed. Most often they are installed in a free corner of the room.
• Symmetrical specimens are often compact in size. The most common products are 110x110 cm (standard). They fit seamlessly into small spaces. Symmetrical specimens are either high or low.

How to choose?

Let's consider in detail what parameters you should rely on when choosing acrylic fonts of different shapes and sizes.

• Be sure to study the number of reinforced layers of the selected acrylic model. You can see them by looking closely at the edges of the plumbing item.
• It is advisable to gently tap the acrylic bath. If you hear a booming sound, it will speak of high quality and good quality of the product.

• Remember - no chemical smell should come from the acrylic model. This sign may indicate poor product quality. It is better to refuse to buy it in favor of a more reliable and environmentally friendly option.
• Run your hand over the surface of the font. It should not show any scratches, roughness or any other damage.
• The color on the acrylic bathtub should lie neatly and evenly. There should be no streaks on the product.

Tips & Tricks

It is recommended to remove stains and any dirt from the acrylic bath with the help of products for smooth surfaces, and scale - with a napkin dipped in vinegar.

When choosing acrylic plumbing, you need to take into account its weight . Of course, most acrylic models are lightweight, but this parameter still needs to be taken into account. The slabs in your home should be ready for this kind of stress.

It is recommended to install acrylic bathtubs with a frame or a special frame.

Thanks to these individual designs, the hot tub will not suffer from heavy loads and will also remain stable throughout its entire service life.

And also a special screen can be installed under the bath. Its size directly depends on the dimensions of the bowl and the height of the base.

If you are going to install an acrylic bathtub in a room with a complex configuration, then you are better off choosing the option from asymmetric models. In environments with a standard layout, it is permissible to place options for simpler forms.

In a rectangular room, it is recommended to install a bathtub of a similar structure . It should be placed along one of the walls. In square rooms, a corner bowl will look better, access to which is possible from any side.

When choosing an acrylic bathtub, it should be remembered that high-quality products are made of cloths, the thickness of which is at least 5 mm.

In a family with small children, it is recommended to use acrylic plumbing items, the depth of which is no more than 50-60 cm.

Watch the slope of the bath. At first, you will not notice it, but then it can cause discomfort if done incorrectly. It is for this reason that you should lie down in a bowl before buying. This is the only way you can understand whether the chosen model is right for you.