2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Concreting is one of the most difficult and important stages in the construction and renovation process. The result of construction depends on the quality of such actions, whether it is pouring the foundation of a building, installing floors or installing cover or floor slabs.
One of the most important elements of concreting, without which it is impossible to imagine the process itself, is a cement-sand mortar . But it was like that before. Today, there is no need for it, because there is a new and modern material, the quality and technical characteristics of which are no worse. We are talking about sand concrete of the M500 brand. It is about this free-flowing construction mixture that will be discussed in the article.
What it is?
The composition of sand concrete of the M500 brand includes only sand, concrete and various modifying components. Large aggregates such as crushed stone, gravel or expanded clay are absent in it . This is what distinguishes it from ordinary concrete.
The binder is Portland cement.
This mixture has the following technical characteristics:
- the maximum particle size is 0.4 cm;
- the number of large particles - no more than 5%;
- density coefficient - from 2050 kg / m² to 2250 kg / m²;
- consumption - 20 kg per 1 m² (provided that the layer thickness does not exceed 1 cm);
- liquid consumption per 1 kg of dry mix - 0, 13 liters, for 1 bag of dry mix weighing 50 kg on average 6–6, 5 liters of water are needed;
- the amount of the resulting solution, the kneading field - about 25 liters;
- strength - 0.75 MPa;
- frost resistance coefficient - F300;
- water absorption coefficient - 90%;
- the recommended layer thickness is from 1 to 5 cm.
The surface filled with sand concrete hardens after 2 days, after which it can already withstand the load . It is also worth noting the resistance of the material to temperature extremes. Installation works using sand concrete can be performed at temperatures ranging from -50 to +75 ºC.
Sand concrete of the M500 brand is one of the highest quality and most reliable materials for installation and construction works that exist today. It has a number of features, among which it is worth noting:
- high strength, wear resistance;
- corrosion resistance;
- minimum shrinkage factor;
- homogeneous structure of the material, there are practically no pores in it;
- high plasticity;
- high coefficient of frost resistance and water resistance;
- ease of preparation and kneading.
As for the shortcomings, it is regrettable, but they also exist. Rather, one, but quite significant - this is the cost. The price for sand concrete of the M500 brand is very high . Of course, the properties and physical and technical parameters of the material fully justify it, but such a price excludes the possibility of using the material in everyday life.
Scope of application
The use of sand concrete M500 is relevant in industrial production, in cases where absolutely all parts and structural elements of a building or structure to be erected must have high strength. It is used during the installation process:
- strip foundations for buildings, the height of which does not exceed 5 floors;
- blind area;
- load-bearing walls;
- bridge supports;
- brickwork;
- supports for hydraulic structures;
- paving slabs;
- wall blocks, monolithic slabs;
- high-strength floor screed (flooring made of M500 sand concrete is made in garages, shopping centers and other places that are characterized by a constant high load).
As you can see the scope of application of this bulk building material is quite wide and varied … Very often this type of material is used for the construction of underground structures, such as metro stations.
Sand concrete M500 is not only a super-strong material, but also has a high level of vibration resistance, which makes it possible to use it not only on the ground, but also under it.
Sand concrete mixture is extremely rarely used in private construction . This is, of course, due to the high cost of bulk building material and its high strength. If on the territory of a private house there is a need to erect a one-story building or a temporary building, concrete of a lower grade can be used.
How to use?
Sand concrete is sold in bags. Each bag weighs 50 kilograms, and on each bag, the manufacturer must necessarily indicate the rules and proportions for preparing the mixture for its further use.
To obtain a high-quality mixture, you must observe the proportions and follow the instructions:
- pour about 6–6.5 liters of cold water into a container;
- the concrete mixture is gradually added in a small amount to the water;
- It is best to mix the mortar using a concrete mixer, a construction mixer or a drill with a special attachment.
Ready-made mortar "sand concrete M500 + water" is ideal for leveling floors and walls. But if it is necessary to fill the foundation or concretize the structure, it is also necessary to add crushed stone.
Its fraction must necessarily be the smallest, and the highest quality.
As far as water is concerned, there is a very thin line here, which in no case can be crossed. If you add more water than needed, the mortar will lose its strength, as the amount of moisture allowed is higher than normal . If there is not enough liquid, the surface will spread.
The ready-made sand concrete solution must be consumed within 2 hours after preparation. After this time, the solution will lose its plasticity. Consumption per 1m2 depends on the type of work and the thickness of the applied layer.
Recommended:
Sand Concrete For Screed: Consumption Per 1 M2 Of Floor. The Best Brand Of Sand Concrete For Screed Construction. Semi-dry Sand Concrete Screed From Expanded Clay And Sand Concrete
Sand concrete for screed, features. Consumption per 1 m2 of floor. The best brand of sand concrete for screed construction. Semi-dry sand concrete screed from expanded clay and sand concrete
Cement M500: The Density And Characteristics Of The Bulk Mixture Of The M500 Brand, White Euro Cement In Bags Of 50 Kg, The Specific Gravity Of The Composition D0 With The PC Marking
Cement M500 is very popular and in demand in construction. This is due to the fact that the density and characteristics of the M500 bulk mix meet the requirements even for extreme environmental conditions. Where is the best place to apply a hydrophobic plastic compound? What is the best way to store white Euro cement in 50 kg bags?
The Proportions Of Concrete For The Blind Area: The Composition Of The Solution In A Concrete Mixer, The Proportions In Buckets And Shovels, The Proportions Of Cement Of Different Brands For Pouring The Blind Area Around The House
Blind area - concrete flooring adjacent to the foundation of the house along its perimeter. It is needed to prevent the foundation from undermining due to prolonged rains, from which a lot of water that has flowed out through the drain collects near the base on the territory.
How To Dilute Sand Concrete? Proportions With Water And Gravel, With Expanded Clay And Gravel. How To Make A DIY Mixture? Composition For Paving Slabs And Concrete
How to dilute sand concrete? Proportions with water and gravel, with expanded clay and gravel. How to make a DIY mixture?
Sand Concrete M200: Composition And Proportions Of The M200 Brand. What Is The Consumption Of Sand Concrete For Brick Laying? Specifications, Weight And Density
What is sand concrete M200 and where is it used? What is the consumption of sand concrete needed for laying bricks and building blocks? The composition and proportions of the preparation of the M200 brand for floor pouring and the construction of wall structures
