Bath Feet: Versatile Options For Steel And Acrylic Products, DIY Decorative Items, Adjustable Cast Iron Bath Stands

2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33

If you are thinking of buying a bathtub, you must immediately pay attention to the choice of legs for it. Nowadays, the choice of filling for the bathroom is one of the daunting tasks. After all, there are so many offers, the assortment is so great that the eyes run wide. To choose a product that will last a long time and will be a stylish element in the interior of your home, you need to take into account the recommendations below.

Peculiarities

It is possible that a comfortable bath in the form of a graceful design can be located in the center of the room. In modern design, such a move is a luxurious addition to the interior, it is considered an elegant solution, it looks very dignified. Today, a variety of options for the location of the baths are practiced. But do not forget that it should be not only beautiful, but also reliable. Nowadays, modern bathtubs with graceful legs are no longer considered an exotic element, they can easily be bought at a regular plumbing store.

An important criterion is the size of these very legs . Before purchasing such accessories, you need to think about the current installation height of a cast iron or steel bath. If you choose between models that are not adjustable in height and models to be adjusted, please note that the type of supporting elements also depends on this choice.

The non-adjustable feet have a standard height: short 19–20 centimeters, and high - 40 centimeters. Decide immediately at what level you need to mount the bathroom. Subtract the height of the font from the resulting number and get exact data at what level you need to install the legs. The optimum height for non-adjustable models is 120 mm.

Unlike non-adjustable models, adjustable ones are more practical, they allow you to change the current mounting height of a steel or cast iron bath. The standard height is also one hundred and twenty millimeters. Such structures do not always fulfill the functions of the necessary support for the bath.

A modern beautiful bathtub can become a decoration of the house due to its installation on original legs, become a kind of designer item. Special stands may be needed to ensure proper functioning and stability of the bath.

A wide range of decorative and original modern legs are made from high quality metal such as bronze. They can take the form of unusual mythical paws, adorable flowers, images of elves and magical fairies. It looks very stylish and relevant both in modern design and in antique rooms.

What types are there and how to choose?

Legs are one of the accessories for the bath, they can be purchased together with the bowl. It is better to do this right away so that the bowl matches the size. This is a prerequisite for further convenience during installation. The legs, which are necessarily included in the set for each bath, the manufacturer is responsible for the complete set, perform the following functions as a supporting, compensatory and decorative function. All of these functions are very important both collectively and individually.

Based on these functions, three types can be distinguished: support legs, original famous false legs and auxiliary legs. In today's market, such a rich selection of these accessories cannot go unnoticed. It immediately becomes clear that each type has its own function and is an important element in the installation of the bath. Manufacturers can offer the buyer and combined options, there is also a wide assortment of both price and design.

Today it is easy to find the best option for stands and legs for cast iron, acrylic or steel containers.

Consider the most relevant types of supports

1. Reliable supporting structures that perform a supporting function. These products have a rigid fastening that will not allow the container to slide or swing during use.
2. Auxiliary elements necessary to give stability. Used to install the bathtub on a flat floor surface in order to fix and ensure immobility.
3. The final ones are variable, adjustable supports. Here, the height of the legs can be adjusted using screws, which is very convenient and practical.

It is worth noting that the main differences between all legs are in characteristics such as strength, fastening reliability, load bearing. It depends on the tightness of the legs and the correct attachment whether the bowl is securely fixed. Today, gold or forged overhead products are becoming more and more popular.

The choice of legs depends on what type of bath you decide to choose and from what material. Let's look at the three main types of bathrooms and determine which type of legs is suitable for each of them.

For cast iron

One of the most popular options in apartments is a cast-iron bathtub, which has proven itself to be reliable, durable, and easy to use. Accordingly, such models are characterized by a high price, which is not surprising, because a large amount of cast iron is used in their production. Since such an undeniably advantageous bathtub is heavy, the design for the bowl should be as reliable and safe to use as possible. Therefore, high strength of the supporting elements is indispensable in this case.

There are several options for attaching such legs . One of them serves for the installation of bearing supports, is fastened with a wedge between special projections. The second fastener - with nuts, is mainly used for decorative legs to hide the unaesthetic look of the support. Moreover, hydromassage systems are built into modern cast-iron bathtubs using new technologies. It will cost much more. Cast iron legs are more designed to hold a bulky and very heavy bath, and come with them on sale, in the attached package.

It is recommended to purchase a decorative kit that will hide the main support. A bathroom with such unusual and original decor elements will create an atmosphere of comfort and coziness in the room. A freestanding oval cast iron bathtub is most often equipped with high sides.

The following features of the legs designed for a cast-iron bath can be distinguished: they are made directly from reliable cast iron; it is imperative to additionally fix it by erecting a podium from brick structures; sometimes with the help of nuts, decorative props are fixed; even simple support legs are fitted with a wedge in the recessed tabs.

Most consumers prefer a light steel frame. Thanks to him, you can set the direction of the room in a high-tech style and at the same time get a reliable and safe design.

For acrylic

Acrylic models have received tremendous popularity today. The elegant legs for acrylic bathtubs are two metal bars that are attached directly to the bottom of the bathtub, and the legs themselves are screwed into them. It is a versatile, comfortable and easy-to-use design.

The main advantage of acrylic bathtubs is the general availability due to the relatively low cost . There is also a very large selection of colors, sizes, designs in the assortment, which is a plus when choosing offers on the market. The light weight of acrylic bathtubs is a distinctive feature that influences the choice of legs. After all, the shape of the legs must be stable, safe to use. Although the legs in this case are more of a decorative function, since an additional frame takes on the supporting one, it is he who supports the entire structure.

Particular attention must be paid to the installation of corner baths. Here, in addition to the main fastening, a frame made of a profile pipe in the form of a cross is also needed. In combination with wall ties, an even distribution of loads between the floor and walls can be achieved. The installation for acrylic bathtubs in the middle of the room consists of robust pipes that take the entire weight load, this interior is a great success today. Speaking about design, it should be noted that such a structure is capable of not only changing the interior, but also creating a new decorative orientation of the room.

For the iron

A distinctive feature of a steel bath from a cast iron bath is that it is lighter. This bathtub is installed on two pairs of legs made of sheet iron. The legs are attached to a curved plate that supports the bottom. They can be fixed with bolts or other adjustable fasteners. An alternative mounting method is a single four-legged structure. This structure is attached with studs to achieve greater rigidity.

Without reliable support, a steel bathtub can fall, so you need to fix it in such a way that it is not only beautiful, but also safe. Depending on where the bathtub will be installed and the method of installation and fastening of the legs is chosen.

Consumers note such positive qualities of steel baths as strength, low weight, low cost. It occupies a high position in the sales market, because it is easy to install it anywhere, at any height, in a position convenient for you.

Also, for such a bathroom, it is possible to purchase special frames that allow a bath in any part of the room. This is a very original and bold design. At the same time, ugly legs can be covered with decorative overlays, which will add even more piquancy and sophistication. Contrasting legs look very good with steel bathrooms: black for white bathtubs or shiny steel or white for colored ones.

Versatile options

In some cases, when it is necessary to adjust the height of the fasteners for a perfectly level installation of the bath, they resort to using universal legs. When purchasing these legs, you need to consult with a specialist, as not all bathtubs are suitable for such legs. Additional fixing methods may be required. Sometimes sellers offer homemade legs, they need to be treated with caution, since they cannot provide long-term impeccable support.

Popular models

To make a win-win choice at the time of purchase, it is worth determining which models are the most attractive and popular. Among them, there is sure to be the perfect combination that is right for you.

It is the bathtubs that stand separately, unlike the built-in ones, that erase all the boundaries of the imagination, because the manufacturers have taken care of a large selection of different shapes, colors, dimensions of this design. The attention of the buyer is presented oval, round, rectangular, and even sample bathtubs as in the old days, curly, each of which has the size necessary for you, for example, of the Roca brand.

Cast-iron bathtubs are more and more classic forms, but the acrylic bathtub has a colossal wide range of colors and shapes . Bathtubs made of unusual materials such as wood, artificial marble, exclusive glass are also very original. This is a pilotage of all the desires of the consumer. Of course, it is very difficult to give your preference and make a choice. But after the bath model is still selected and installed, you can apply some more tricks in the interior of your bathroom. For example, you can install a canopy with a white or transparent, weightless tulle curtain.

It looks very original and sophisticated. Designers explain the need for such eye-catching products by the modern desires of consumers to purchase something unusual and add chic to the everyday interior. It is with the help of catchy and irresistible baths that the opportunity to express your good taste opens up. You can decorate the interior with a beautiful fountain or a small aquarium, and then the bathroom will look like a paradise garden.

Helpful hints

When you finally come to the conclusion that you want to have a bath with curly legs, you need to take note of the following rules.

• It is important to remember that even before making a purchase, it is imperative to check all the fasteners, the reliability of the legs. It is worthwhile to decide in a timely manner whether the chosen size is suitable for your bath form.
• Do not forget to pay attention to the material itself, from which the legs are made, it must be designed for heavy loads. The most common reliable materials are steel or bronze, and enamelled iron will do.
• It is not necessary to install the structure on old cracked coatings. In this case, the safety rules are violated. It is recommended to replace the old coating with a new one before starting work.
• When choosing legs, do not forget what function each of them has. Does this foot only serve as a decoration, or is it the main support for your bathtub.

• Remember that fasteners such as duct tape are not reliable. Moreover, it is insecure. Although many are attracted by its ease of use, its use for this purpose is contraindicated. It is better to use strong fasteners such as self-tapping screws, brackets.
• When installing the bathroom in the desired location, avoid scratching the floor and the product to be installed. To do this, when fixing the fasteners, it is recommended to turn the bath upside down or lay it on its side.
• Choose all plumbing accessories wisely so that the overall look is not damaged at the end of the work.

The bathroom must not only be assembled, but also securely fixed on the surface . Sometimes it is necessary to put special pads and screw them to the product. They can also be attached using a special moisture resistant construction adhesive.

Do not forget to decorate the places where you decided to fix the legs. You can decorate in various materials and ways. With such a difficult matter as installing a bathtub on its legs with your own hands, you need to take into account a lot of expert advice.

Let's consider the main ones:

• be sure to check the integrity of the kit, whether it is completed according to existing standards or not;
• be careful when choosing a place for your bath, you must take into account all possible nuances during installation;
• be sure to install a brick structure;
• prevent and avoid scratching the surface of the bathtub, it is necessary to use cushioning materials when installing;

• if you want to install the bathtub next to the wall, then do not forget that you will need additional fasteners in order to secure the installation and installation;
• in order to avoid the appearance of mold on surfaces, in no case neglect such an important matter as pre-treatment of the wall;
• give preference to universal legs, they are similar to almost all models and therefore it is impossible to make mistakes when choosing;
• use overlays if you want to hide ugly supports.

Summing up, the following advantages of choosing the right legs can be highlighted: reliable support, effective design accessory, height adjustment. Cons: most bathtubs are sold without legs, there is a risk of making mistakes when choosing them. Improper fixation of supports for steel and cast iron products eventually leads to negative consequences: the enamel surface cracks, the bottom is deformed; weak legs break. Cast iron and, to a lesser extent, steel are heavy. The weight of fonts filled with water can only withstand reliable bases, which are not so easy to pick up.

However, all these arguments for and against can be balanced by seeking the help of qualified specialists when choosing . So you can make the only right choice, thanks to which a reliably standing bath will delight its owners for many years.