Wall Fiberboard: Installation Of Panels On The Wall, Cladding Of The Kitchen And Bathroom, Cladding With Glue, Decorative Finishing With Printed Sheets

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

For the decoration of premises for various purposes, fiberboard panels are often used. This facing material has a number of positive characteristics and many advantages. Thanks to fiberboard, you can beautifully decorate a room, create a stylish interior, and besides, its cost is affordable for everyone. There is a technology for cladding with material, which is worth familiarizing with if you need to create an interior finish. You can study the recommendations of specialists to cope with the work yourself.

Overview of types and sizes

The market offers a wide variety of interior decoration products. Fiberboard has advantages that distinguish the material favorably from competitors … With the help of panels, you can get a coating with imitation of other materials, choose colors and even texture. Fiberboard is a safe type of cladding that does not harm human health and the environment. Manufacturers often use the dry method to make panels.

It is impossible not to highlight the ease of installation, since you can work with the material independently without outside help . There are different installation options, each of them has its own characteristics. As for the cost, the panels are offered at an affordable price, this has influenced the increase in demand for the material. Thanks to fiberboard, you can insulate the room, as well as get sound insulation. If you choose the right wood fiber panels that meet high requirements and standards, their service life can reach 10 years, and this is not a short period.

In order for the use of the cladding to be possible in a room with high humidity, it is necessary to choose a special type, covered with a protective impregnation. It is also important to observe the storage conditions so that the material does not deform, therefore, products are often attached to the crate with self-tapping screws.

Stacked wall panels are one of the most popular types of fiberboard. With such material, work is carried out very quickly, you can choose a decor option from a wide range. It is important to pay attention to the dimensions of such boards: the thickness can be 6–25 mm, and the length reaches 4 m, the width range is 15–30 cm . Thanks to the choice of such parameters, it is possible to carry out finishing of any complexity. For fastening, a lock connection is used. On the market, you can find a product with a double-sided coating, so the protective functions are ensured.

Sheet moisture-resistant panels are presented in a large format, so they can be used in large rooms. Often, such a finish is chosen to decorate an apron in the kitchen. This material fastens with precise edge fits.

The tiled variety of fiberboard is a finishing material with parameters 300X300, 150X600 and 980X980 mm . Docking is used for fixing, however, panels with a lock connection can be found. If you need a decorative design of a room with interesting combinations, you can safely choose slabs that fit both the bedroom, the living room and other parts of the house.

The laminated panel is offered in the size 2850X2070X3.0 mm. Such sheets have a protective film that is created from melamine or acrylic resin. It is this coating that is decorative and is offered in a variety of colors.

Choice of decor

The variety of designs is wide, so everyone can choose something original and beautiful to create an interesting and stylish interior . Fiberboard wall panels are distinguished by their ability to imitate many materials. If you want to create a stone finish, but you do not have enough funds, you can safely choose a wood board cladding, because this will be an excellent alternative. The effects of natural materials are achieved thanks to modern technologies, so the coating can reproduce the breed of different stones, including the choice of texture.

Brick finish is also in great demand, besides, the panel is much more affordable, and it is much easier to work with it due to its weight. Installation will not take much time, and you can handle it yourself. The decorative effect will be amazing, and no one will suspect that the cladding is not made of real brick.

The tile will also look good in the kitchen, but to save money, you can choose to imitate it with fiberboard panels. It is worth noting that this type of cladding is often combined with other materials, and it looks interesting.

Of course, natural wood is always relevant in the interior, but at the same time it is not cheap . That is why wood-grain fiberboard panels are in greatest demand, because they can imitate deciduous and coniferous species, the pattern repeats the texture and will perfectly fit into any design. With such a wide variety you can improve your home with minimal investment, update the interior and get a beautiful room.

Plating technology

It should be noted that the installation of fiberboard can be done by different methods, each of which has its own characteristics and advantages. You should explore the options to find the most suitable one.

On glue

This option of laying on walls is only suitable in cases where the base is perfectly flat, there are no defects, cracks or depressions on it. If we are talking about a damp room, you can safely choose this installation method. To achieve an excellent result, follow the step-by-step instructions.

• First you need make sure the surface is even , and if there is even a slight deviation, you will need to use a putty to achieve a perfect finish.
• Then you need start priming , choosing a composition with deep penetration. Experts recommend applying at least 2 layers.
• Only after the base is completely dry, you can start styling .

To glue the panel, use a tile compound with excellent adhesion … Liquid nails are the best choice, they are easy to work with and the result will be perfect. First, you need to make markings and adjust the panels to the desired parameters. To do this, you need sandpaper, which you need to process the smooth side of the sheets: this is how you can get a strong grip. It is necessary to cover the entire perimeter of the material with a solution and install the element in its place, alignment is done at this stage.

Then it remains to press the panel and proceed to the next part, until the entire cladding is mounted. This method is suitable for cladding a bathroom and other rooms in a wooden house.

On nails and screws

This technique is in demand due to its reliability, therefore it is often used in difficult areas, after all, its main advantage is strength and durability . To upholster a room with material, it is necessary to make markings on the wall and adjust the elements to the desired parameters. The slabs are pre-drilled at pre-marked points. Holes for dowels must be created in a concrete or brick wall. After that, the facing material is applied to the surface and fixed with a drill.

However, this mounting method has one drawback: the markup will be explicit. therefore it is recommended to place the dots in those places where they will be least noticeable, or they can be hidden by decorating . If possible, choose panels with tenon grooves, and to secure them, use clamps. To close up the joints, you can use tinted putty or decorative overlays, which will also hide the remnants of the installation.

On the crate

This design is necessary only in those cases when it comes to creating a partition. The scheme of work consists of the following stages.

• The first step is to clean the base , remove all unnecessary, close up cracked cracks and saturate the surface with an antiseptic.
• To sheathe the surface it is recommended to use a wooden beam , it is important to make sure that it is well dried and has a protective coating. If curvature is found, leveling should be done with a primer.
• For further alignment of the connecting strips markings are made on the wall .

To attach the frame parts correctly, it is recommended to start at the corners. For this, the base of the elements is drilled out, after which a substrate is used for level fixing.

In order for the racks to be mounted in the same way, it is necessary to pull the cord. Self-tapping screws are used to fasten the fiberboard, but if there is a lock connection, it is worth stocking up with clamps. The big advantage of this installation method is that, thanks to the crate, you can install communications and even insulate the room.

Once the process is complete, the skirting boards can be installed. Based on such instructions, you can independently cope with the work and make repairs without large investments.

Recommendations

Thanks to a wide variety of textures and imitations, colors of fiberboard panels, everyone can choose for themselves what meets taste preferences and requirements in interior matters. To get the best possible result, several factors should be taken into account:

• it is important to use only tested fiberboard panels that have a safety certificate;
• in order not to face a shortage of material, you will need to calculate the consumption of plates;
• the surface must be ready for the installation of cladding boards, so make sure that the base is dry and free from defects, because this can lead to serious problems during repairs.