2024 Author: Beatrice Philips | [email protected]. Last modified: 2023-12-16 05:33
Polyurethane has excellent performance characteristics. Thanks to this, he practically displaced rubber of various brands and other materials that were used as seals (cuffs) from many areas of the industry.
What it is?
Polyurethane is an artificial material that is used to replace sealing products made of rubber, rubber, leather. In almost all cases, using it more expedient due to improved properties. Its primary purpose is to be used as a sealing element to prevent leakage of working fluid or gas in hydraulic or pneumatic equipment.
One very remarkable property of polyurethane cuffs is the so-called mechanical memory . After the load ceases to act on the seal, its original shape is restored. This allows the cuffs to work with a high degree of efficiency in any equipment and withstand even high pressures.
Compared to cuffs made of other materials, polyurethane cuffs have the following advantages:
- extended service life: due to their increased wear resistance, they can be used 3 times longer than rubber;
- high elasticity: can stretch twice as much as rubber;
- increased resistance to all types of fuels and oils;
- reliability;
- stably withstand high loads;
- chemically resistant to acids and alkalis;
- there is a possibility of application in the temperature range from -60 to +200 degrees Celsius;
- do not conduct electric current.
All these possibilities are unattainable for rubber.
Types and purpose
According to GOST 14896-84, hydraulic cuffs are divided into types according to the degree of pressure. This takes into account the pressure that they can withstand during operation in the equipment. At the moment, there are three types:
- the first type includes those cuffs for hydraulics and pneumatics that are capable of withstanding pressure from 0.1 to 50 MPa (1.0-500 kgf / cm²);
- the second type is characterized by the ability to work in the range from 0.25 to 32 MPa (2.5-320 kgf / cm²);
- in the third, the working pressure ranges from 1.0 to 50 MPa (1.0-500 kgf / cm²).
Clarification: at this stage, cuffs of the second type in accordance with GOST 14896-84 are not used and are not produced. They are replaced with seals of the third type of suitable size or made according to TU 38-1051725-86.
The classification of seals by diameter for hydraulic cylinders and other devices can be studied according to the reference document GOST 14896-84.
Cuff manufacturing technology
There are two methods for making cuffs: classic (this is casting) and turning from a workpiece.
For casting, a shape is required that repeats the appearance of the future cuff . Liquid polyurethane is poured into it through a hole under pressure. Spreading in shape, it displaces air through the second window. After the mixture has filled the workpiece, it cools down and takes the form of the desired product.
For the production of polyurethane seals in this way, a special machine is required . - engineering injection molding machine capable of performing injection molding. For this purpose, injection molding machines are used, since they are able to manufacture products of any shape and size in huge quantities.
The advantages of this technology:
- the ability to control the process of selecting the hardness and temperature of polyurethane, compatibility;
- reduced material consumption;
- the ability to release in large batches with high quality workmanship.
There are also disadvantages - this is the high price of the mold, which depends on the complexity of the future product. On average, the cost ranges from 1 to 4 thousand dollars.
Turning is used when the number of parts is from one piece to one thousand, and this is turning on CNC machines. The workpiece is installed in a numerically controlled lathe, and then, in just a few seconds, the desired part is obtained.
The machine contains a huge number of programs, and having measured the desired cuff, you can immediately repeat it. An employee just needs to choose and set a program, and then everything happens without his participation - in automatic mode.
The quality of the turned cuffs is very high, and this technology is preferable for small-scale production.
Application methods
Polyurethane cuffs are used in various hydraulic cylinders to seal gaps between the cylinder and rod walls. They are widely used in food, agriculture, construction and many other areas.
There is a manual for each hydraulic motor, which shows how to use and change the seals. But there are general recommendations:
- first you need to visually inspect the cuff for external defects;
- examine the installation site of the seal, there should also be no damage, dents there;
- then you need to remove dirt and grease residues from the seat;
- carry out installation in a special groove, avoiding twisting.
A well-chosen and correctly installed polyurethane collar will extend the life of the hydraulic cylinder.
Recommended:
Hydraulic Drills: Do-it-yourself Manual Hydraulic Rotator For An Excavator And For A Water Well, Mounted And Other Hydraulic Augers, Drawings Of Self-made Hydraulic Drills
How to make a do-it-yourself manual hydraulic rotator for an excavator and for a water well? You can not only buy water drills, but also create for your home yourself! You just need to follow the drawing and instructions, having studied the types of hydrodrills for making with your own hands
Professional Polyurethane Foam: Characteristics Of All-season And Winter Foam, Options In Large Cylinders, Products Of The Imperial And TechnoNIKOL 65 Constant Brands
Professional polyurethane foam is used for a variety of construction work. What are the characteristics of all-season and winter foam? What are the options in large cylinders?
Foam For Wall Insulation: Insulation In Cylinders, Polyurethane Assembly Products For The Roof And Facade Of The House, The Subtleties Of Application
Foam for wall insulation is one of the most convenient options for this, despite its high cost. Can it be used as insulation on balconies? How is the process of applying foam from cylinders and what is needed for this?
Hydraulic Press For Car Service: Hydraulic Press For 20 And 30 Tons, Device And Principle Of Operation Of A Manual Garage Hydraulic Press Of Floor Type
What is a car service hydraulic press? Which hydraulic press is ideal for automotive service? For which types of cars can a 20 and 30 ton hydraulic press be used? We tell in this publication
DIY Hydraulics On A Mini-tractor: A Diagram Of The Operation Of Manual Hydraulic Valves. Features Of Homemade Hydraulic Cylinders. How To Make A Hydraulic Wheel Drive?
There is a hydraulic system in the design of any tractor. It can be modified and optimized to fit your needs. Do-it-yourself hydraulics on a mini-tractor will allow you to use the equipment with maximum efficiency. How to build and install by yourself? What is the operation of manual directional valves? Operating instructions and troubleshooting tips. What are the features of homemade hydraulic cylinders? How to make a hydraulic wheel drive?