Cabinet Handle Profile: For Sliding Doors And Swing Doors, 10 And 16 Mm, Other Sizes, For Upper Hinged And Lower Cabinets For Chipboard, Others

2024 Author: Beatrice Philips | [email protected]. Last modified: 2024-01-18 12:09

Modern design options use furniture designs with hidden handles. Such products look as neat as possible. Most often they are equipped with special profile handles. The article will discuss the main advantages and disadvantages of such products, as well as what types they can be.

Pros and cons

Profile handles have a number of important advantages. The most significant of them should be highlighted.

• Convenience . Using such handles, you can open various furniture structures as conveniently as possible. As a rule, they run along the length of the entire product. However, such elements will not be visible from the outside.
• They can be suitable for various furniture . Profile handles are widely used in the production of various models of cabinets, including swing cabinets, sliding wardrobes, and hinged kitchen models.
• Safety . First of all, safety in the kitchen is ensured by the absence of protruding small elements. Most often in kitchens, standard straight models with a chrome finish are used.

Profile-handles for furniture have practically no drawbacks . It should only be noted that such elements can be inconvenient when opening massive furniture. If there are such products in the room, then classic and hidden handles are often combined.

Views

Profile handles can be made in various designs. Let's get acquainted with the most popular models.

Overhead . These varieties have the most simple design. In addition, they have a relatively low cost. Such furniture products can be installed both on the top and on the bottom of the structures. Overhead models can also be fixed on the side end, in this case, their length will coincide with the length of the end. Sometimes they are attached to the back of the product, while remaining completely invisible.

Currently, special ultra-thin aluminum handles of this type are produced, they will not weigh down the entire structure.

Mortise . Handles of this type are recessed into the end of the furniture. They are completely hidden by the façade. For the strongest fixation in MDF, chipboard, additional fillers are used, which ensure the most tight fit of the product to the surface of the structure. These profile handles usually take up half or a third of the length of the furniture. The most common options are L-shaped or C-shaped parts. The first type is used mainly on floor-standing cabinets; they are often placed directly under the countertop. The second type is more often used for all other cabinets, and it can also be used in the manufacture of niches.

Design and dimensions

Profile handles can be produced in a wide variety of colors and designs. They are often made from a variety of chrome-plated processed metals . And also some models are made with a gold or silver coating.

Sometimes a special powder paint is applied to the surface of such handles, which will imitate aged bronze . The most popular among buyers are such products made in matt black, graphite, matt aluminum, dark brown.

The sizes of these furniture handles can also vary . But most often there are models in which the total length can reach up to 2, 7 meters, their height is 10, 16 mm, and the width can be 200-400 mm.

Manufacturers

Let's highlight the most popular manufacturers of such furniture handles

• MAKMART . This company produces a wide variety of furniture fittings, including handle-profiles. They can be produced with a beautiful matt black, bronze, matt white finish. Models can be produced in a wide variety of sizes. All of these products are made from processed metals with various protective coatings.

BOYARD . This manufacturing company produces profile handles, which are mainly made of steel or nickel. They are available in matt or high-gloss chrome. The range of products includes end models, handles-brackets, which are often used for wardrobes and for swing structures.

Some varieties are produced in the style of antique bronze, and there are also options for glossy gold, antique zinc.

RAY . This company sells profile handles with a sleek and modern design. All of them have clear lines, are as easy to use as possible, most often they are acquired for modern, high-tech, minimalism styles. The brand's products have a wide color palette, so if necessary, you can find a suitable model for any furniture. Most of the models are made of aluminum. Some samples are produced with a beautiful satin golden finish, such copies will perfectly fit into almost any design, more often they are taken in the manufacture of swing structures. Many samples are simply made of polished stainless steel, this option is considered universal.